AUCH, SORE BACK! HOW TO MEASURE THE PERFECT COUNTER FOR YOUR KITCHEN

If you’re like most people, you spend a lot of time in your kitchen. Whether you’re cooking a big family meal or simply making yourself a cup of coffee, the counter is the centerpiece of your kitchen. But if your counter is too high or too low, it can cause aches and pains that make your kitchen experience less enjoyable. In this article, we’ll talk about how to measure the perfect counter for your kitchen so you can avoid those sore backs and enjoy your time in the kitchen.

Why Counter Height Matters

Before we get into measuring, let’s talk about why counter height matters. The ideal counter height can help you avoid back, neck, and shoulder pain. If your counter is too high, you’ll have to reach up to work on it, which can cause strain in your shoulders and neck. If your counter is too low, you’ll have to bend over to work on it, which can cause lower back pain. Finding the right counter height is crucial for a comfortable and pain-free kitchen experience.

Measuring for Counter Height

Now that we know why counter height matters, let’s talk about how to measure for it. The standard counter height is 36 inches, but that may not be the right height for you. To measure for counter height, follow these steps: 

  • Stand up straight with your arms at your sides and your feet shoulder-width apart. 
  • Bend your elbows at a 90-degree angle and hold your hands up as if you were working on a counter. 
  • Measure the distance from the floor to your hands. 
  • Subtract the height of your shoes from the measurement you just took. 
  • Add 1-2 inches to the final number to account for the thickness of the countertop.  

The final number is the ideal height for your kitchen counter. If the number is close to the standard height of 36 inches, you’re in luck! If it’s higher or lower, you may need to make adjustments to your kitchen or consider custom countertops.

Other Factors to Consider

While measuring for counter height is an important factor in creating a comfortable kitchen, there are other factors to consider as well. For example, if you’re tall or short, you may need to adjust the height accordingly. If you have a physical disability or mobility issue, you may need to consider a lower or adjustable counter. Additionally, the type of work you do in the kitchen may require different counter heights. For example, if you do a lot of chopping, you may prefer a lower counter, while if you do a lot of baking, you may prefer a higher counter.

In Conclusion, your kitchen counter is one of the most important features in your kitchen, and finding the right height can make all the difference. By measuring for counter height and considering other factors, you can create a comfortable and functional kitchen that you’ll love spending time in. Say goodbye to sore backs and hello to a pain-free cooking experience!

Happy Share

S.O.S.: SAVE OUR SINK! PROVEN TECHNIQUES FOR MAINTAINING YOUR CABINET UNDERSINK

Cabinet undersinks are one of the most important parts of any bathroom or kitchen. They are often used to store cleaning supplies, toiletries, and other essential items that need to be kept hidden away. However, they are also one of the areas that are most susceptible to damage from water and other spills. To keep your cabinet undersink in good condition, it’s important to know how to treat it properly. Here are some tips on how to do just that:

KEEP IT DRY

The first step in treating your cabinet undersink is to keep it as dry as possible. Any water or moisture that is allowed to sit for an extended period of time can lead to mold growth or other damage. So, be sure to wipe up any spills or leaks as soon as you notice them. You can also use a fan or dehumidifier to help keep the area dry.

USE PROTECTIVE COATING

To protect your cabinet undersink from moisture and spills, you can use a protective coating. There are many different products available that are specifically designed for this purpose. Some popular options include polyurethane, enamel, and epoxy coatings. These products can help to prevent water from seeping into the wood or other materials, and they also add a layer of protection against scratches and other damage.

apply sealant

Another way to treat your cabinet undersink is to apply a sealant. This is especially important if your cabinet is made from wood, as wood is particularly susceptible to water damage. A sealant can help to prevent water from seeping into the wood and causing it to swell or warp. There are many different types of sealants available, including silicone, acrylic, and polyurethane. Be sure to choose a sealant that is designed for use on the type of material your cabinet is made from.

use non toxic cleaner

When cleaning your cabinet undersink, it’s important to use non-toxic cleaners that won’t damage the surface or harm your health. Avoid using harsh chemicals or abrasive cleaners, as these can scratch or damage the surface of your cabinet. Instead, opt for gentle cleaners that are specifically designed for use on the type of material your cabinet is made from. You can also make your own non-toxic cleaners using ingredients like vinegar, baking soda, and lemon juice.

check for leaks

Finally, it’s important to regularly check for leaks under your sink. Even a small leak can cause a lot of damage over time. Look for signs of water damage, such as warped or discolored wood, and check for moisture around pipes and connections. If you notice any leaks or damage, be sure to address them right away to prevent further problems.

In conclusion, treating your cabinet undersink properly is important to keep it in good condition and prevent damage from moisture and spills. By following these tips, you can help to protect your cabinet and ensure that it lasts for years to come.

Happy Share

DESIGN YOUR DREAM HOME WITH PERSONALIZED FURNITURE – EXPERIENCE THE INCREDIBLE BENEFITS OF CUSTOMIZED PIECES!

When it comes to furnishing your home, there are many options to choose from. You can go with pre-made furniture, or you can opt for something truly unique – custom-made furniture tailored to your specific needs. While it may seem like a more expensive option, the benefits of customized pieces far outweigh the cost.

Perfect Fit: Furniture Tailored to Your Space

Firstly, having furniture that is designed specifically for you means that it will fit your space perfectly. No more awkward gaps or pieces that are too big or too small. Everything will be made to measure, ensuring that it fits seamlessly into your home.

Personalized Style: Choosing the Right Materials and Finishes

Customized furniture also allows you to choose the materials and finishes that you want. This means that you can get exactly the look and feel that you’re after, rather than having to settle for something that’s almost right.

Reflect Your Taste: Furniture Designed to Match Your Personal Style

In addition, personalized furniture can be designed to match your personal style and preferences. Whether you prefer a classic look or something more contemporary, your furniture can be tailored to reflect your individual taste.

Functional Design: Furniture Made to Serve a Specific Purpose

Another benefit of customized furniture is that it can be designed to serve a specific purpose. For example, if you work from home, you may want a desk that is designed for your specific needs. Or, if you have a small space, you may want a piece of furniture that doubles as storage. With custom-made pieces, you can get exactly what you need.

Quality Craftsmanship: Furniture Made to Last

Finally, customized furniture is often of higher quality than mass-produced pieces. When you work with a skilled craftsman or furniture maker like us, Bali Interio, you can be sure that your pieces are made to last. With experienced craftsmen and a professional team, Bali Interio can provide custom furniture tailored to your specific needs. The materials and construction will be of the highest quality, ensuring that your furniture will look great and function perfectly for years to come. 

In conclusion, while customized furniture may seem like a more expensive option, the benefits far outweigh the cost. You’ll get furniture that is perfectly tailored to your needs and preferences, that fits your space perfectly, and that is made to last. So, if you’re considering furnishing your home, choose Bali Interio for your personalized furniture needs and experience the difference that quality craftsmanship makes.

Happy Share

Credits : 

https:// id.pinterest.com/pin/703756185459657/

https:// id.pinterest.com/pin/817544138618649763/

https:// id.pinterest.com/pin/50665564551410079/

3 REASON WHY YOU NEED USE MARINE PLYWOOD FOR YOUR KITCHEN SINK CABINET

If you’re in the process of designing or remodeling your kitchen, you might be wondering what type of material to use for your sink cabinet. While there are a variety of options available, marine plywood is one of the best choices you can make. Here are three reasons why you should consider using marine plywood for your kitchen sink cabinet:

DURABILITY AND RESISTANCE TO MOISTURE

One of the biggest benefits of marine plywood is its ability to withstand exposure to moisture, humidity, and even saltwater. This makes it an ideal choice for use in bathroom and toilet environments, where moisture levels are typically high. Traditional plywood is prone to warping and delaminating when exposed to moisture, which can significantly shorten its lifespan. However, marine plywood is specifically designed to resist these issues, which means that your kitchen sink cabinet will last longer and require less maintenance over time.

GREATER STRENGTH AND STABILITY

Marine plywood is available in a range of sizes, thicknesses, and grades, making it a versatile choice for a variety of different projects. It is also easy to cut, shape, and finish, allowing you to customize your kitchen sink cabinet to suit your specific needs and style preferences. Whether you prefer a modern, minimalist design or a more traditional look, marine plywood can be adapted to fit your vision

VERSATILE AND CUSTOMIZABLE

Marine plywood is constructed using high-quality, waterproof glue and several layers of thin wood veneers. This construction method results in a plywood sheet that is stronger and more stable than traditional plywood. This added strength can help your kitchen sink cabinet withstand the weight of items stored inside, as well as the wear and tear of daily use. This is particularly important for sink cabinets, which can be prone to damage from water and heavy kitchen appliances.

In conclusion, marine plywood is an excellent choice for your kitchen sink cabinet due to its durability, resistance to moisture, strength, stability, and versatility. While it may be slightly more expensive than traditional plywood, the long-term benefits of using marine plywood make it a wise investment for any homeowner. If you’re looking for a material that will stand up to the demands of daily use and look great for years to come, marine plywood is the way to go.

Types of Interior Finishing Materials

Hello Bali Interio friends! For those of you who don’t know what interior finishing is, don’t worry because on this occasion we will discuss FINISHING IN THE INTERIOR. Interior finishing is the work of closing or coating in a room. The following are several types of INTERIOR FINISHING materials.

HPL

Sumber foto : Pinterest

HPL (High Pressure Laminate) is a finishing material that is known to be strong and has a high level of elasticity. Because of the mixture of wood and acrylic fibers contained in it.

HPL also has various colors and motifs so it is suitable for friends who want to create a home interior with a modern minimalist concept.

MELAMINE

Sumber foto : Pinterest

Melamine is in the form of liquid melanin. Its use is sprayed on the surface of the furniture that has been caulked, sanded, and painted with thinner. This finishing technique produces 2 types of furniture, namely matte (not glossy) and glossy (glossy).

LACQUER

Sumber foto : Pinterest

Lacquer is a finishing material with excellent scratch resistance and water resistance. This material is in great demand by Europeans.

VENEER

Sumber foto : Pinterest

It is a finishing material made from real wood fibers. This material will give a natural look to the furniture. However, veneer has a high price and its application is done carefully because it is thin.

DUCO PAINT

Sumber foto : Pinterest

This finishing technique uses duco paint and the process is almost similar to the melamic technique, which uses a spray, but with longer duration.

The difference between duco paint and melamic is that the fibers in the furniture will be covered so that a minimalist, luxurious, and clean impression will be seen.

ACRYLIC

Sumber foto : Pinterest

Acrylic material is perfect for friends who like bright and vibrant colors. This material is usually used for modern kitchen.

 

JOINT SYSTEM FURNITURE

Hello friends of Bali Interio, joint is a minimalist concept that originally emerged from Zen, the Japanese philosophy of minimizing distractions in order to focus more on paying extraordinary attention to detail and the connection of one of these details in the manufacture of furniture, especially furniture made of wood, rattan or bamboo.

In the world of carpentry, a connection is a combination of two elements of wood with certain techniques to get a more complex shape. In addition to the wood itself, wood grafting techniques can also involve bolts, screws, glue and so on. In addition to adding strength, today’s joints are often exposed to improve the visual quality of the furniture design itself. Each carpentry work in some respects has its own connection characteristics, for example, the connection for furniture with techniques in buildings has various differences.

The main factor in making a connection is strength, therefore one of the things to consider in making a connection is the direction of the wood grain. Incorrect grain direction can lead to wasted connection making. Here are some of the basic types of joints we commonly encounter in carpentry.

butt joint

This connection is the most basic wood connection that brings together the two ends of the wood at a certain angle. These joints require glue or screws to strengthen them. Often in furniture products knock down with the help of a fisher at the end of the wood that will meet the end of the coupler. To get a perfect angle, the pieces of wood on one or both of the wood must be perfectly shaped so as to eliminate gaps that can reduce the strength of the connection. Also known as a sweet joint.

Dado Combination

This joint is a simple type of T joint, providing a gap in the board so that the verticals can fit the horizontal boards inside. This joint usually combines glue and strategy for strength. With gaps or trenches in a part of the board, the T-joint made is stronger than the regular tail-joint because it doesn’t slide easily.

Rabbit Joint

This connection is a type of L connection located at the end of the wood. It has better strength compared to the regular tail connection but requires more effort. Both rabbet and dado connections usually use a router for their manufacture in order to get precise, clean, and consistent results.

finger joints

This connection is an extension of the tail joint type. So that the strength is built in a well balanced way in each wood as well as in each gap. The strength of this connection is higher by one level of connection dado and rabbet and can be exported using either two or one type of wood.

Pass Connection

This joint is one of the favorite joints in furniture making. Can be exposed by using two different types of wood materials so that the color of each wood provides a blend of contrasting color differences. In terms of strength, this joint is an improvement over the finger joint because it locks at one point of tension as well as changes in angle. Compared to the past, using either a bench or a hand router is now much easier because the manufacture of router bits (router bits) of various sizes are made. Dovetail consists of three types namely full, half and shear. Sliding dovetails are usually used to make T joints.

Dowel

Dowels are cylindrical pieces of wood that are plain or threaded to function as holding the two pieces of wood together and installed like pegs by applying glue beforehand. These joints can be exposed to show off and the strength of the joints made with this technique. Dowels can also be used as a complement to other connection techniques to have a level of strength one level above it.

Pocket Connection

This joint uses the force to join two pieces of wood by creating a slanted path to insert it. After locking the two pieces of wood, usually the resulting hole will be covered with wood putty to ensure that when it’s finished there’s no space that doesn’t look good. To make a hole with an accurate slope and the same as the others, a certain jig is usually used.

Half Round Joint

This connection uses each half to get the desired angle with the aim that the strength is evenly distributed in the two wood materials that are joined. These joints can also be used with glue or solutions, but in certain sizes, these joints with precise measurements can strengthen other joints in more complex constructions.

Tongue joint

Using a router, tongue joints are usually used to make large plank sheets from joining the boards on the sides. For example, to make a door leaf or a table top from solid wood boards. This connection usually uses glue as reinforcement and then presses using rope, technical glue or other pressing each edge so that the gap between the boards is completely closed. This connection is like connecting the bottom of the letter T with the letter U.

Mortise connection

This connection is made by inserting part of one piece of wood into a hole in the other. The holes and ends of the wood made for these joints are usually squares made using a bench mortice tool that can make box holes. Although it can be re-strengthened with styling or dowels, usually the use of wood glue is sufficient and does not result in other exposed materials. This connection technique we usually encounter in old wooden chairs.

Biscuit joint

This connection to make a wide wood can also use biscuits together. This connection is a wood edge connection by making paths or holes on both sides of the wood and tucking the wood in the holes between the wood. This method usually uses thinner pieces of wood that are stronger than the base wood. For example, to tuck in between mahogany, use teak wood and so on with wood glue.

Happy Share

LET’S GET TO KNOW THIS MATERIAL BEFORE MAKING A KITCHEN SET

Hello friends of Bali Interio, are you tired of the kitchen and want to renovate? Or you just want to design a kitchen but are still confused about the material for the kitchen set? Right now, we will discuss about the advantages and disadvantages of materials commonly used in making kitchen sets. Read to the end, don’t miss anything!

Solid Wood

This material is the most commonly used material if you want to make a kitchen set. The nature of the wood is not too much, the stock is always there, the type, and can choose the reason why many people use solid wood as a material for making kitchen sets. Melia wood, teak wood, mindi wood, and Indian rosewood are some types of solid wood that are commonly used in making kitchen sets.


Solid wood material has several other advantages, including the availability of many choices of colors, fibers, and textures, as well as its sturdiness which can make the kitchen set more durable and accompanied by regular maintenance.


However, with all the advantages offered, of course we have to pay dearly for production and maintenance costs. Solid wood is very sensitive to air humidity, so we need to really pay attention to air humidity because it can affect the quality of the wood surface

multiplex

Multiplex is a layered wood that is pressed under high pressure. The texture of the dense wood layer makes the multiplex more sturdy and resistant to air, so the multiplex is the right choice if you want to make a kitchen set in a wet kitchen.
The combination of wood fibers and bark where the outer surface is stronger than the middle surface makes the multiplex more resistant to expansion and not easy to bend. Multiplex can last up to 10 years if we use and care for it properly.
Multiplex has a fairly expensive price because of the quality offered, but the price is not as expensive as solid wood. So this can be a solution as a substitute for solid wood if your budget is not sufficient.

block board

Blockboard has multiplex, only the blockboard layer is made of pieces of wood arranged horizontally, while the multiplex layer is arranged vertically. One type of wood used is sea sengon, a type of wood that is sturdy and water resistant. However, even so, the water absorption capacity of the blockboard is not too high. For those of you who have a limited budget, blockboard can be a solution because it has a relatively cheap price compared to multiplex.

Metal (Stainless steel and Aluminum)

Kitchen sets that use metal are usually often used in restaurants. This material has a fairly expensive price. Metal can give a unique appearance. Stainless steel and aluminum have several advantages, including durability, rust and stain resistance. This material is also unaffected by heat and humidity. The aluminum material is easy to scrub and clean, so it won’t get dirty from the spices and pans stored in the kitchen.
But my goodness, the choice of colors for this material is very limited. When polishing rust or rust, it may need to be re-polished. Metal surfaces and fingerprints will be clearly visible. This material is also easy to bend.

Hopefully this article can help you in choosing the right materials to make the kitchen of your dreams!

Happy Share

ROOM PARTITION TO MAKE THE OCCUPANCY MORE FUNCTIONAL

Hello friends of Bali Interio, partition is a field that is used as a space separator that is designed to be non-permanent. Its function is to separate the space so that it remains spacious even though it is divided into two or more rooms. Apart from being a room divider, now partitions also have other functions and purposes, namely as a space aesthetic provider or decorative element. Here are some types of space partitions that can be used for minimalist spaces:

Multifunctional Glass Partition

This type of practitioner can work not only as a space divider but can also have storage to store things.

Shelf Partition

The use of a shelf-shaped partition model is the most appropriate choice for a minimalist room. Besides being able to function as a barrier, this room divider also increases the functionality of the space, which is also storage. This storage can be filled with books, decorations or photos according to residents’ wishes.

Vertical Wooden Partition with Storage

This type of partition uses vertically mounted wooden beams complete with storage to fill the partition.

Minimalist room partitions usually have a very simple shape, in accordance with the principles of minimalism itself. Some things that can be considered in looking for a partition for residence are looking for a minimal partition with other colors or choosing a soft color. Before designing the partition that will be used for housing, you should first see which room will be used for the partition. If the room to be partitioned looks quite narrow, then a minimalist hollow partition design can be an option.

Happy Share

TYPES OF SOUND SILENCER MATERIAL

Hello friends of Bali Interio, in addition to the sound produced, the sound also maintains the speed of sound so as not to make the room feel too quiet. The silencer is able to control the sound in the room to find the ideal level, which is 55 dBA.

| Material Working Principle |

In principle, sound works by applying an acoustic system in the room. Acoustics itself is the principle of sound arrangement that precipitates and absorbs sound in a closed room. This material comes from originating from one room that affects other rooms.

By installing sound, the sound produced in the room will sound more natural and clear. Not surprisingly, this material is applied to music studios and cinemas to produce higher sound quality.

| Type of Acoustic Material |

PET Material

Polyethylene Terephthalate (PET) is the material most often used by major manufacturers because of its ability to absorb and absorb sound at the same time. In addition, PET is also very easy to shape so it is easy to adjust to the size and shape of the room. This sound installation is very practical because it does not require a frame. Installation of PET on the surface of walls, floors, and ceilings can be done directly by using adhesive tools such as nails, yellow glue, or double-sided tape.

The appearance of the sound color of PET is quite varied, very flexible to match the interior design of the room used. Regarding the dangers of the chemical content in PET, this material is made from recycled plastic so it is more environmentally friendly.

Glasswool

This type is a material made of fiberglass. For the texture, it is similar to fleece or wool. The thickness of the material itself is about 2.5 cm – 5 cm with a density or density of about 25 g/cm³ to 75 g/cm³. You can find glasswool material on the market in the form of rolls with a length range of 30 meters.

Rockwool

Rockwool is made of lightweight mineral fibers that can absorb sound and heat. At first glance this material is similar to glasswool, only the density of rockwool material is higher with a range of 30 g/cm³ – 100 g/cm³. Therefore, many use rockwool as a second layer of glasswool silencer. If you want to be interested in this material, you can make sheets or rolls.

Greenwool

Greenwool is a material made of polyester fiber with water resistance or hydrophobic properties so that it is difficult to affect air humidity. Actually, this green sound material from the beginning considered that glasswool and rockwool materials were not good for health. Yes, thanks to the basic material in the form of polyester, green wool is considered safer and less dangerous.

For installation, this material can be affixed or planted on the surface of the wall. Kania advises, you should use two layers of greenwool so that noise can be muffled to the maximum.

Egg Foam

Egg foam material has a fairly light weight and is easy to apply. However, this material is not optimal enough to be considered high-frequency sound. As an alternative, you can use egg foam material as an additional soundproofing layer.

Soft Board

Softboard is a material made of sound made of polyester fiber. Its thickness is around 1.2 cm and generally the softboard is brown like the color of wood. You can use this material to be considered an echo and absorb excessive sound. For installation, softboard material is usually wrapped with cloth or wallpaper that is not noisy.

Natural Silencer

In addition to using various materials, sound regulation in the room can also be done by utilizing ornaments and objects that have the ability to absorb sound. Carpets that cover the entire floor of the room and books that fill the walls can be used as natural sounds.

Downstairs

Soundproofing in hardwood or tile requires underlayment and subfloor to reduce your transmission.

Gypsum Board Material

As a room divider, gypsum material has many advantages, starting to be resistant to fire, resistant to earthquake shocks, and making the room cool faster. Not only that, gypsum can also be a soundproofing in the room because it has an acoustic function. The acoustic function of gypsum includes two things, namely soundproofing and sound absorption.

Source : 

https://www.dekoruma.com/artikel/82853/material-peredam-suara

https://www.rumah.com/panduan-properti/cara-membuat-peredam-suara-ruangan-43399

Happy Share

A CLOUD-INSPIRED SOFA AND ARMCHAIR

Hello friends of Bali Interio, Pascali Semerdjian Arquitetos designed the Cloud Sofa and the Cloud Armchair to make you fell like you’re sitting on a cloud. With its cozy nest of foam pillows that come together, the seating surfaces become soft and comfortable while still remaining modern and sophisticated. The Cloud Sofa was the first design, which launched their partnership with ETEL Interiores, and Cloud Armchair is based on the same principle.

Each pillow segment is formed manually, one piece at a time, making this a time-intensive design

The structure can also be made from different types of Brazilian wood.

Happy Share